Double Groove O Belt Roller Drive Roller
Material: carbon steel, Stainless Steel , zinc-plated
Application: O belt driving conveyor roller
Work environment: indoor conveying, food industry
Work life: Smooth delivery and low noise
1.Simple arrangement. Easy installation and maintenance.
2.The driving torque deteriorates rapidly from roller to roller. Typically single MDR can only drive 7 to 8 rollers. The weight of single items to be conveyed should not exceed 30kg.
3.The preloading value is required for the length of O-belt loop. It may vary according to the different O-belt suppliers. Please check the specifications with the O-belt supplier. Typically, reduce the preloading value by 5% - 8% from the theoretical length of loop.
Based on the 2260 Series, covered with grey polypropylene taper sleeve; abrasion resistant, low noise, shockproof.
The O-belt pulley is located on the head end of the roller which separates the drive area and the conveying area avoiding interference between the O-belt and the conveyed goods.
The bearing end cap consists of a precision ball bearing, a polymer housing and end cap seal. Combined they provide an attractive, smooth and quite running roller.
The design of the end cap protects the bearings by providing excellent resistance to dust and splashed water.
Because there is no grooving on the tube, the tube will not have any distortion and the roller will run more smoothly.
The load capacity of the roller depends on the drive capacity of the O-belt. The weight of single items to be conveyed should not exceed 30kg.
Temperature range: -5℃ ~ 40℃.