Nonpolar Alarm Input Module for Fire Control

Model Number: AW-AIO2188-IN-17 Brand Name: ASENWARE Key Specifications/Special Features: Product overviewThe AW -AIO2188-IN Intelligent input module (AW-AIO2188-IN module for short) is used with AW -AFP2188, a two-bus fire alarm control panel. It can be connected with a conventional smoke detector, a conventional heat detector, a conventional manual call point, a conventional hooter/horn and some other equipment.After the said equipment starts to operate, the alarm signal output will be sent by the AW-AIO2188-IN module to the fire alarm control panel through a signal bus to give a fire alarm.Product featuresMode of operation: Nonpolar two-wire system;

Operation indicator: The inspection indicator will blink once about every 12 seconds in the inspection status or remain lit in the operation status;

Product parameters

• 1. Mode of operation: Nonpolar two-wire system
• 2. Quiescent current: <0.5mA (bus); <6mA (power line)
• 3. Action current: <2mA (bus); <15mA (power line)
• 4. Operation indicator: The inspection indicator will blink once about every 12 seconds in the inspection status or remain lit in the operation status.
• 5. Operating environment: Temperature: -10°C~50°C; relative humidity: ≤95% (40°C±2°C, without condensation)
• 6. Terminal load: 4.7K resistance
• 7. External dimensions: 86×86×40(mm)
• 8. Weight: about 119g
• 9. Executive standard: GB16806-2006

Means of transportation
We usually deliver products by DHL, PUS, FedEx, or Air.